Over the weekend I finished this modified Pintuck Wristlet and today it is available as a sample. Sold - Thanks!
This is the large size from the pattern, but printed at 75%. I've printed pattern pieces scaled to a variety of sizes, and this was the first time I had trouble getting it to print at the specified size.
Someone else also recently mentioned having the same problem, so I did a little research and discovered this probably a glitch in Preview (Mac PDF reader program). In the past, when I changed the scaling amount it automatically registered when clicking on print.
Anyway if you are having trouble printing at a different scale, this might fix it for you:
1. Change the number in the scaling box to your desired size.
2. Leave the cursor at the end of the number in the scaling box.
3. Hit return on your keyboard instead of the print button.
Viola! It will print at your desired size.
Ok, back to the wristlet...
At 75% there was still room for the magnetic snaps on the flap, but if you go any smaller than 75% you'll probably need to move the snaps up on both pieces.
At this smaller size the bag is now about 7.5" wide x 4.25" high (19 x 11cm).
Besides the overall size, I made the strap pieces thinner (2.5"/64mm wide), and used one of these 5/8" nickel d-rings instead of a round ring.
The lining is a few different black and white prints:
Sold Out
